We currently operate four automatic band saws, the largest of which is capable of cutting tubesup to 762mm and we can flame cut tubes to over 2500mm diameter. Our standard saw cutting tolerances are +/-3mm and for flame cutting -0/+15mm or you can have closer tolerances by agreement.


Employing highly qualified welders, we routinely produce and deliver extended lengths up to 3 metres long, and we have produced lengths exceeding 50 metres in the past. Our sub arc welding machines are able to join our tubes together reliably and quickly to produce whatever lengths you want. The performance of our welding is routinely checked, randomly, by independent inspectors to ensure quality.


If you need confirmation of the properties of any of our material, we can always provide certification by independent testing and analysis before despatch. Please note for testing we use UKAS approved independent laboratories. You can even have third party inspection & validation if necessary, we will be pleased to help you arrange it. You only pay the level of testing you require.


Chemical analysis, UTS testing (Yield, Tensile & Elongation properties) and Charpy Impact tests are routinely specified by our customers. More extensive testing, including ultrasonic, magnetic particle and even radiography can be arranged when required.


We have automatic shot blasting machines with up to 1 meter diameter capacity, larger sizes can be manually blasted. Our paint spraying capabilities give you the option of having your orders shot blasted and coated before they leave our works. We hold stocks of the most commonly specified paints that our customers request, so we can unsure customers’ orders can be progressed quickly. Once coated, pipes are protected from damage during handling and loading to ensure they leave our works in perfect condition.


Although mill certificates are not available with Non Prime products, you may want to know some of the properties of our material. Through our unique pipe numbering system, all of our stock can be traced to source. We make a note of all details our suppliers give to us and can often pass this data on to you but without warranty.


Customers are always welcome to visit our works to inspect our stock before ordering. If you need third party inspection, we’re happy to work with companies like Lloyds, DNV, Bureau Veritas etc. We understand the cost associated with their service, so we work closely with them to ensure their visits are efficiently arranged to reduce costs.


Shri Ram Tubes stocks a full range of stainless steel, inconel, hastelloy as well as alloy 20 pipe, tube, sheet, plates & coils. Skids and corner protection is standard packaging for our industrial products. Bar and tube products are bundled and protected as appropriate for size and scope of the order. Most shipments are delivered on our dedicated fleet of trucks.

Stainless Steel Flat Bar

  • Alloys: 304, 34L, 316, 316L
  • Thickness Range: .125" to 1"
  • Width Range: .500" to 12.00"
  • Length: 12-14" r/l, 20"
  • Processing: Cut to Length

Stainless Steel Hex Bar

  • Alloys 303, 34/304L, 316/316L
  • Size Range: 1875" to 2"
  • Length: 12" R/L
  • Processing: Cut to Length

Stainless Structural Angles

  • Alloys: 34, 340L, 316, 316L
  • Size Range: 750" x .750" x .125 up to 6" x 6" x .500"
  • Length: 20" r/l
  • Processing: Cut to Length

Stainless Tubing – Round, Square and Rectangular

  • Alloys: 304, 34L, 316, 316L
  • Wall Thickness Range: .035" up to .500"
  • O.D. Range for Round Tube: .125" to 7.5"
  • O.D. Range for Square Tube: .500" – 10"
  • O.D. Range for Rectangular Tube: .500" – .750" through 8" – 12"
  • Length: 20" r/l
  • Processing: Cut to Length

Stainless Steel Sheet

  • Alloys: 201, 31, 34, 34L, 39, 316, 316L, 321, 409, 410, 410S, 430, 439
  • Thickness Range: 7 gauge to 28 gauge or 3.664mm to .321mm
  • Width Range: 3" to 72"
  • Length Range: Up to 144" Non-Standard or Longer Lengths Available Upon Request
  • Finishes: 2D, 2B, 4Pol, BA, X10, XL, Buff, XL Blend S, PVC & Paper Interleave
  • Processing: Shearing to Custom Sizes & Sheet Coil CTL available

Aluminum Sheet

  • Alloys: 3003 H14, 5052 H32
  • Thickness Range: .032" to .249" or 0.812mm to 6.34mm
  • Width Range: 36" to 72"
  • Length Range: Up to 144" Non-Standard or Longer Lengths Available Upon Request
  • Processing: Shearing to custom sizes & Sheet Coil, Cut to length from coil, PVC & Paper Interleave

Stainless Plate Smooth and Diamond Pattern (Canada Only)

  • Alloys: 201, 201LN, 31, 31LN,304, 34L, 34H, 39S, 310S, 316, 316L, 321, 254SMO, 2205
  • Thickness Range: .1875" – 2" or 4.762mm to 50.8mm
  • Width Range: 36" to 120"
  • Length Range: Up to 240" Non-Standard or Longer Lengths Available Upon Request
  • Processing: Cut to length & Plasma Cutting – Diamond Plate Also Available